VIP Polymers - Advanced Polymer Solutions

VIP-Polymers Ltd, 15 Windover Road, Huntingdon, Cambridgeshire, PE29 7EB T: +44 (0)1480 411333 E: sales@vip-polymers.com ©copyright

DOWNLOADS

Rubber Flooring (169kb)

The table below shows approvals for the rubber flooring available from VIP-Polymers.
Further approvals information is available on request.

Test	Test Standard	Requirement	Typical Values	Laboratory
Hardness	ASTM F-1344	85 Shore A min	88	Vimta Labs
Thickness	ASTM F-373	+0.381/ -0.127mm	2.99	Vimta Labs
Quality of cut	ASTM F-511	0.005 inch (0.127mm) max	0.10mm & free from nicks, bow cuts, etc.	Vimta Labs
Size	ASTM F-536	± 0.018 inch/0.45mm	0.33mm	Vimta Labs
Squareness	ASTM F-1344	0.010 inch/ 0.254mm min	0.004 inch	Vimta Labs
Module at a 10% elongation	ASTM F-1344	300 psi min	475	Vimta Labs
Resistance to heat	F-1514	Av Delta 'E' not > 8.0	2	Vimta Labs
Thermal conductivity	BS 7340 Part 2		0.2004 W/m°K	Bakelite Hylem Ltd
Compression set at room temperature for 24 hrs	BS 1711 - 1975		9.5	Vimta Labs
Resistance to cigarette burns	DIN 51961		No change in colour and smooth surface observed	Vimta Labs
Critical Radiant Flux	ASTM E 648 comparable to NFPA 253	NPFA Class 1 = > 0.45	Class 1	SGS, USA
Smoke density	ASTM E 662 comparable to NFPA 258	0 - 450	Passes	SGS, USA
Insulating Properties - 3mm thickness	IS : 2584 - 1963	Voltage 15 kV applied	Withstood	CPRI, India
Antistatic Properties	BS 2050 - 1978		4.4 x 107	ETDC, India

USEFUL INFORMATION

> Swatch cards